Duration : 0:0:37

Technorati Tags: ball, golf, hitting, slo-motion, steel, Super

Many years ago golf was played in Scotland, they obviously did not have all the equipment that we enjoy nowadays and certainly did not play the game in the structured manner that we do. Back then they had to utilise both golf balls and clubs which were both manufactured from wood.

It as back in the 17th century that the feather golf ball was designed and introduced, another word for this type of ball was the featherie. The feather golf ball was made from goose feathers which were compressed into a sphere which was normally cow hide. The feathers were compressed into the cow hide whilst the cow hide was still wet. When all the feathers were in the hide was left to dry and as it dried it shrank creating a hard golf ball.

These balls, however due to the nature of creation and build time were very very expensive and quite often cost much more than the golf club itself. Due to the cost of purchase only the more financially privileged golfers could afford to purchase such a ball.

After the feather ball came the creation of the guttie golf ball. This type of ball was made from the sap of a gutta tree, the gutta tree is predominantly found in the tropics, These balls were created whilst the sap was hot where the ball was shaped, when it dried it formed a hard rubbery golf ball. Due to the ease of manufacture these golf balls were a lot cheaper to both manufacture and purchase.

There was a huge difference between the featherie and the guttie though. The guttie did not fly as far or as true as the featherie. This was identified as being due to the completely smooth surface of the gutterie which limited the golf ball in the air.

Designers of golf balls eventually came up with a solution – the creation of the golf ball dimple – and these are still utilised on golf balls nowadays.

The dimples on a golf ball are created to reduce resistance to air whilst the ball is in flight. When a ball without dimples is in the air a huge pocket of dead air is created behind the ball which creates drag, therefore slowing the ball down. The dimples on a golf ball reduces this dead air behind the ball, therefore reducing drag and allowing the golf ball to travel. It does this by the dimples creating turbulence in the air around the golf ball which in turn ensures that a spiral like trail of air is left behind the ball rather than a huge amount of dead air. This spiral of air allows other air particles to flow around the ball rather than just past it.

The dimples of the golf ball dependant upon the type of center in the ball can allow for an amount of spin to be imparted onto the ball at impact, this can either create backspin upon impact with the ground or allow the golfer to control the ball better in the air – ie to draw a ball.

Dimples have been on golf balls now for many many years, however it is believed that they were created after the introduction of a one piece golf ball with a rubber core. This golf ball had a smooth outer on it and golfers found that they were able to hit a better shot as the ball started to wear – ie the outer edge started to become rough. It was around 1905 when the dimpled golf ball was officially introduced and from this time dimples have been used on all golf balls, in 1921 the golf ball was modified so that all balls were a standard size and they were all the same weight.

Nowadays, there is an absolutely staggering amount of variety when it comes to the selection of a golf ball. There are golf balls which are designed to go a long way, other which are designed to be very soft so that more control can be achieved. Even the dimples vary slightly between balls, there are some balls which have more than others and some balls have slightly different shaped dimples. No matter which golf ball you decide to play you can be sure that you are playing with an item which has evolved through evolution and is at present at or very near its optimum.

Peter Cunningham
http://www.articlesbase.com/golf-articles/what-is-a-golf-ball-62773.html

The core is not hollow, but the core is not near as heavy as a metal would be.
Cutting the golf ball in half would be a start, then dig out what is in the middle. Then try to find a heavy metal ball that will fit inside. But make sure that the inside is completely filled up or the ball will wobble and not roll right.

The material to make a golf ball is a very small part of the cost of making the golf ball.

Most of the cost is in the machinery, wages and other expenses for the production line that makes the golf ball, the management of the factory, rent, etc., etc.

Did you know that close to 5000 designs have been developed, approved and patented since the 1990s ? its no wonder then that it is one of the most artfully designed items in the field of sports.

With so many options to choose from, choosing a suitable golf all is indeed a golf player’s nightmare.

Because of the multiplicity of player types, the designers have also tried to develop different designs of balls which can suit each player, so that maximum fun can be derived from the game, as well as increase the possibility of a par.

Structure of a golf ball

1. Two-piece balls, also called ‘distance balls’ by the players are made up of material that is hard and immune to cuts. They are known for their ‘distance’. The inner of these balls are tight and can be made of different materials. The distance a ball can travel is decided by how hard the inner is. It is a fact though that these balls lack the ability to spin, and it is difficult to manage these two-piece balls, because of its limited ability to spin.

2. For better feel and ability to spin, three-piece golf balls are ideal. They are made only for this purpose. The outer softer coat or Balata covers a tight inside. There is a fabric layer that occupies the space between the outer cover and the core. This lessens or softens the blow of the club on the ball. Though this gives the ball a better feel and spin, the areas of compromise are longevity and the distance.

3. When you want an all-purpose ball, go for balls which multi-layered. These balls consist of a lasting, soft cover which contains many layers of thin materials and a vastly improved inner core. This makes the ball good in all respects.

Choosing the right ball for you :

1. Novices and players with high handicap who are most likely to hit the ball wrongly, should go for two-piece golf balls which has a Surlyn coat since these balls last longer, cheap and come with the ‘distance’ advantages.

2. golf balls with three-piece structure with Elastomer or Balata outer cover are good for mid handicap players. These balls are capable of ‘ swing speeds’ and do not make any compromise on the distance aspect.

3. Experienced golf players should choose multi-layered balls. Since these players are low handicap and have good ’swing speeds’ they can get the advantage of distance, feel as well as good spins.

Much like other equipment required to play golf, getting the right ball for you would require a lot of trial and error till you hit the right choice. But do not refrain from playing this enjoyable game – you will definitely get to the most perfect choice of ball in no time.

Brian Kendall
http://www.articlesbase.com/golf-articles/tips-in-buying-a-golf-ball-83780.html

Oh, and Googie… I believe it is "putt" for dough. Close enough.

Duration : 0:0:30

Technorati Tags: ball, golf, Peter Randall-Page, slow-mo

Who sells a standard size energy efficient golf ball light bulb?

try google.